Osuszacze powietrza regenerowane na gorąco z dmuchawą HZP
Adsorpcyjny osuszacz sprężonego powietrza
Natężenie przepływu powietrza od 500 m³/h do 14900 m³/h
Przedstawiamy NOWĄ gamę osuszaczy adsorpcyjnych regenerowanych na gorąco z dmuchawą, zaprojektowanych w celu zaspokojenia potrzeb aplikacji wymagających ujemnego PDP, przy jednoczesnym użyciu 0 powietrza oczyszczającego i optymalizacji całkowitego kosztu posiadania.Nasze nowe osuszacze sprężonego powietrza HZP zapewniają ciśnieniowy punkt rosy do -40°C i są w stanie obsłużyć przepływy od 500 m³/h do 14900 m³/h. Łącząc sprawdzone zalety osuszania adsorpcyjnego z nowoczesną konstrukcją i naszymi unikalnymi rozwiązaniami konstrukcyjnymi, Hankison zapewnia niezwykle kompaktowy i niezawodny system do wydajnego osuszania i oczyszczania sprężonego powietrza.
Share
Our new dryers are equipped with our unique Energy Management System (EMS) that maximises energy efficiency while maintaining a constant dew point. By using a humidity sensor to continuously monitor the dew point, EMS minimises the amount of compressed air used in regeneration, and optimises heater and blower operation to use only as much energy as necessary to secure required operating characteristics.
Furthermore, we equipped our new HZP dryers with other energy-saving
features such as:
- Solid state soft starters that limit inrush current to ensure a smooth start and
longer blower motor life - Design features such as valve selection, tower size, and filter design meant to ensure low-pressure drop
- The heater and blower are controlled by the outlet regeneration temperature that shuts off to save electrical power once desiccant has been thoroughly regenerated
- Precise heater control ensured by solid-state relays provides reduced heating times and extended heater life
A heated blower dryer with EMS can save you over €20,000 in just 3 years!*
*These calculations are approximations based on the following assumptions: Standard Heatless model 3200 m3/hr, 15% purge air, Heated model HZP3200, 55 m3/min, 1.800 CFM, 400 kW Compressor Motor, 0.07 per kW/hr 80 hours per week, and 40 weeks per year.
| Model | Capacity | Connection | Weight | Dimensions | |||
| Size | [mm] | ||||||
| [m3/h] | [m 3/min] | [kg] | Depth | Width | Height | ||
| HZP500 | 500 | 9 | 2" | 670 | 995 | 1,336 | 1,755 |
| HZP900 | 900 | 16 | 2" | 958 | 1,096 | 1,477 | 2,186 |
| HZP1100 | 1,100 | 18 | 3" | 1,258 | 1,398 | 1,718 | 2,188 |
| HZP1400 | 1,400 | 25 | 3" | 1,451 | 1,398 | 1,718 | 2,188 |
| HZP1800 | 1,800 | 31 | 3" | 1,710 | 1,484 | 2,080 | 2,016 |
| HZP2200 | 2,220 | 37 | 3" | 1,857 | 1,484 | 2,080 | 2,016 |
| HZP2600 | 2,600 | 45 | 3" | 2,504 | 1,860 | 2,622 | 2,357 |
| HZP3200 | 3,200 | 53 | DN100 PN16 | 2,775 | 1,750 | 2,622 | 2,357 |
| HZP3900 | 3,900 | 65 | DN100 PN16 | 3,138 | 1,660 | 2,622 | 2,357 |
| HZP4500 | 4,500 | 75 | DN150 PN16 | 4,077 | 1,949 | 3,054 | 2,541 |
| HZP5300 | 5,300 | 89 | DN150 PN16 | 4,417 | 1,949 | 3,054 | 2,541 |
| HZP7000 | 7,000 | 119 | DN150 PN16 | 5,524 | 2,120 | 3,407 | 2,350 |
| HZP9300 | 9,300 | 155 | DN150 PN16 | 6,072 | 2,312 | 3,779 | 2,462 |
| HZP10600 | 10,600 | 178 | DN150 PN16 | 7,264 | 2,355 | 4,112 | 2,770 |
| HZP14900 | 14,900 | 249 | DN200 PN16 | 9,035 | 2,498 | 4,464 | 2,884 |
Cechy
Our new dryers are equipped with our unique Energy Management System (EMS) that maximises energy efficiency while maintaining a constant dew point. By using a humidity sensor to continuously monitor the dew point, EMS minimises the amount of compressed air used in regeneration, and optimises heater and blower operation to use only as much energy as necessary to secure required operating characteristics.
Furthermore, we equipped our new HZP dryers with other energy-saving
features such as:
- Solid state soft starters that limit inrush current to ensure a smooth start and
longer blower motor life - Design features such as valve selection, tower size, and filter design meant to ensure low-pressure drop
- The heater and blower are controlled by the outlet regeneration temperature that shuts off to save electrical power once desiccant has been thoroughly regenerated
- Precise heater control ensured by solid-state relays provides reduced heating times and extended heater life
A heated blower dryer with EMS can save you over €20,000 in just 3 years!*
*These calculations are approximations based on the following assumptions: Standard Heatless model 3200 m3/hr, 15% purge air, Heated model HZP3200, 55 m3/min, 1.800 CFM, 400 kW Compressor Motor, 0.07 per kW/hr 80 hours per week, and 40 weeks per year.
Specyfikacje
| Model | Capacity | Connection | Weight | Dimensions | |||
| Size | [mm] | ||||||
| [m3/h] | [m 3/min] | [kg] | Depth | Width | Height | ||
| HZP500 | 500 | 9 | 2" | 670 | 995 | 1,336 | 1,755 |
| HZP900 | 900 | 16 | 2" | 958 | 1,096 | 1,477 | 2,186 |
| HZP1100 | 1,100 | 18 | 3" | 1,258 | 1,398 | 1,718 | 2,188 |
| HZP1400 | 1,400 | 25 | 3" | 1,451 | 1,398 | 1,718 | 2,188 |
| HZP1800 | 1,800 | 31 | 3" | 1,710 | 1,484 | 2,080 | 2,016 |
| HZP2200 | 2,220 | 37 | 3" | 1,857 | 1,484 | 2,080 | 2,016 |
| HZP2600 | 2,600 | 45 | 3" | 2,504 | 1,860 | 2,622 | 2,357 |
| HZP3200 | 3,200 | 53 | DN100 PN16 | 2,775 | 1,750 | 2,622 | 2,357 |
| HZP3900 | 3,900 | 65 | DN100 PN16 | 3,138 | 1,660 | 2,622 | 2,357 |
| HZP4500 | 4,500 | 75 | DN150 PN16 | 4,077 | 1,949 | 3,054 | 2,541 |
| HZP5300 | 5,300 | 89 | DN150 PN16 | 4,417 | 1,949 | 3,054 | 2,541 |
| HZP7000 | 7,000 | 119 | DN150 PN16 | 5,524 | 2,120 | 3,407 | 2,350 |
| HZP9300 | 9,300 | 155 | DN150 PN16 | 6,072 | 2,312 | 3,779 | 2,462 |
| HZP10600 | 10,600 | 178 | DN150 PN16 | 7,264 | 2,355 | 4,112 | 2,770 |
| HZP14900 | 14,900 | 249 | DN200 PN16 | 9,035 | 2,498 | 4,464 | 2,884 |